|
授權代理無錫力芯微電子，電平轉換芯片ET2102/ET2104/ET5014 深圳錦宏世紀科技 李工 18938047300 Q:2881671130 ET2102兼容FXMAR2102 ET2102是一款高性能可配置的雙向電壓雙電源轉換器。 在廣泛的輸入和輸出電壓電平范圍內轉換。ET2102也可在推挽式中工作。 該設備的設計使得A端口跟蹤VCCA級別，B端口跟蹤VCCB級別。這允許在1.65V到5.5V的任何兩個電平之間進行雙向A/B端口電壓轉換。VCCA可以等于1.65V到5.5V的VCCB。任何一個VCC都可以先通電。如果任何一個VCC被移除，內部斷電控制電路將設備置于3狀態。 該裝置的兩個端口具有自動方向感功能。任何一個端口都可以檢測到輸入信號，并將其作為輸出信號傳輸?shù)搅硪粋�(gè)端口。 m x 1.4毫米） ET2104替代TXS0104 ET2104是一款高性能可配置的雙向電壓雙電源轉換器。在廣泛的輸入和輸出電壓電平范圍內轉換。ET2104還可以在推挽式中工作。環境。它用于I2C總線兼容主設備和從設備之間的電壓轉換器。提供內部10kΩ上拉電阻。該設備的設計使得A端口跟蹤VCCA級別，B端口跟蹤VCCB級別。這允許在1.65V到5.5V的任何兩個電平之間進行雙向A/B端口電壓轉換。VCCA可以等于1.65V到5.5V的VCCB。任何一個VCC都可以先通電。如果任何一個VCC被移除，內部斷電控制電路將設備置于3狀態。該裝置的四個端口具有自動方向感功能。任何一個端口都可以檢測到輸入信號，并將其作為輸出信號傳輸?shù)搅硪粋�(gè)端口。 ET5014替代NLSX5014 The ET5014 is a 4-bit bidirectional level translator in which the input and output ports are switched automatically without direction control. The data path of each channel can be either from I/O_VLn to I/O_VCCn or from I/O_VCCn to I/O_VLn. All of the I/O ports are designed to track two different power supply rails, VCC and VL respectively. Both of the supply voltage are configurable from 1.2V to 4.5V. The VCC and VL supplies are independent which allows a logic signal on the VL side to be translated to either a higher or a lower logic signal voltage on the VCC side, and vice-versa. The ET5014 has high output current capability, which allows the translator to drive high capacitive loads such as most high frequency EMI filters. The enable pin(EN) is used to reduce the power consumption. The EN pin can be used to disable both I/O ports by putting them in 3-state which significantly reduces the supply current from both VCC and VL. The EN signal is referenced to the VL supply. |
ET2102ET2104ET5014.png (28.01 KB)
